Click here for KMH-MPH Converters, Fog Light Controls and much more for the JDM Imports market
Click here for Solid State Battery Isolators, FiA Rain Lights and much more for the Motorsport industry.
1 x COOLANT LEVEL SENSOR 32MM
1 x FLYING LEAD
COOLANT LEVEL SENSOR 32MM
£119.00 EX VAT
PART NO: CK-CA-32
The COOLANT LEVEL SENSOR gives drivers an early warning system should their engine cooling system develop a leak, whether from a punctured radiator, loose hose or gasket failure, before overheating and engine damage occurs.
The COOLANT LEVEL SENSOR should be fitted at the highest point of the engine cooling system which is usually the top radiator hose. The selected hose needs to be cut through at a convenient position and the sensor inserted. Use the hose clamps supplied to seal the hose ends.
Detects air in coolant system before temperature rise.
0v signal output that can be wired into Dash/Datalogger/LED (not a conventional bulb)/Buzzer.
LED Warning Status also on sensor itself.
Available in 3 different sizes.
Comes with 2 meter flying lead and clamps.
How it works
The Coolant Level Alarm from CARTEK consists of an aluminium sensor tube which is simply fitted in-line with the engine’s radiator hose. The coolant detection electronics are built into this sensor with a 3-pin plug for power input and an alarm signal output.
This alarm output can be used to alert the driver in a variety of ways including activating a dashboard LED indicator, audible buzzer or it can be used to provide the car’s ECU or driver display with a fault detection input signal.
The sensor also incorporates Red and Green LEDs which offers mechanics a continuous indication of the coolant status. This is especially useful if an engine is overheating without good reason or if an engine change has just occurred then this will show if the coolant has been filled correctly.